Our compnay: Jiangsu Xinrongplas machinery Co.,Ltd was founded in 1996, majored in all kinds of plastic pipe machine filed for 27 years. For PVC pipe machine we make diameter range from 16-1200mm. We have one set PVC110-315mm 3 layers pipe machine test for UK customer this week.
1.Two sets SJZ65/132 Extruders,total capacity can reach 500kg per hour.
2.Co-extrusion die, achieve precise dimensions for stable extrusion. Make sure three layer wall thickness ratio can be at 22.5 : 55 : 22.5.
3.Vacuum tank,two chambers to ensure good cooling and forming of pipes
4.Four caterpillars haul off machine, working stable and reliable
5.Planetary cutter with chamfering function
6.Belling machine with R type socket molds
The correct using of the PVC pipe production line can avoid threats to the operator's personal safety, avoid equipment problems, and can better using the PVC pipe production line to bring greater benefits to users.
1. PVC pipe production line factory’s production line when installing, debugging (molding, adjusting blade gap) or disassembling molds, it must be carried out by personnel familiar with the machine in accordance with the prescribed procedures. The sharpness of the blade and die edge should be checked regularly. If the edge is found to be dull, it should be sharpened or replaced in time. Be sure to stop the machine when changing the mold to avoid danger.
2.PVC pipe production line When the factory’s PVC pipe production line is in normal work, do not put your hands or part of the body between the upper and lower molds (blades), and do not put all sundries and tools on the workbench to avoid accidents. Since the PVC pipe production line can be operated by multiple people, there must be someone responsible for directing the production.
3. During operation, be careful when holding the workpiece and waiting for the slide to descend. The gap between the cutting blade and the die and the bending radius must be selected according to the thickness of the copper bar (or aluminum bar).
4. Keep the oil clean and the oil path unblocked, and lubricate the moving parts of each unit every shift. Electrical and hydraulic components must be flexible in movement and correct in position. If abnormalities are found, they must be stopped for inspection immediately.
5. In order to improve the service life of the PVC pipe production line, it is generally required to avoid direct sunlight and other heat radiation, and to avoid places with too much humidity, excessive dust or corrosive gas. Corrosive gases can easily cause electronic components to be corroded and deteriorated, causing poor contact or short circuits between components, affecting the normal operation of the equipment. The precision PVC pipe production line should be far away from equipment with high vibration, such as punches, forging equipment, etc.
6. In order to avoid the influence of large power fluctuations (greater than ±10%) and possible instantaneous interference signals, the PVC pipe production line generally adopts dedicated power supply (for example, it is divided from the low-voltage power distribution room to be used separately for CNC machine tools) or a voltage regulator device is added And so on, can reduce the impact of power supply quality and electrical interference.
7. Safety The operating procedures are one of the important measures to ensure the safe operation of the PVC pipe production line. The operator must follow the operating procedures. When a failure occurs, the operator should pay attention to keeping the site, and truthfully explain the situation before and after the failure to the maintenance personnel, so as to facilitate the analysis and diagnosis of the cause of the failure, and eliminate it in time.
Our company not only produce PVC pipe lines with 16- 1200mm diameter range,at the same time we also produce PE16-2000mm pipe line, PPR pipe line, double-wall corrugated pipe line, etc. If you have any plastic pipe line inquire, please feel free to contact with us!
Post time: May-24-2022